How can I purchase one of Keystone Sporting Arms brands of firearms?

We do not offer any direct to the consumer sales or transfers of firearms from our website or otherwise. This is to protect the brick and mortar dealer businesses that number about 60,000 across the country.

Our dealer locator is also available as a source to find a dealer near you but please note that some of this dealer information may be outdated. You can use any search engine on the internet to locate firearm dealers in your area to purchase our brands from.

When you visit your local dealer that has a current federal firearms license you can ask them to order the model that you are looking for from one of our Wholesale Partners. That list can be found on top of our firearms page at https://keystonesportingarmsllc.com/wholesale-distributor-partners/ on the website.

Your dealer can also order factory direct from us here at Keystone Sporting Arms by calling 800-742-0455 and providing the requested firearm SKU or description, their FFL along with a form of payment that will be processed when the order ships to them on your behalf.

Please keep in mind that there may be quite a lead time for delivery of dealer direct orders because of our current backlog of orders at this time of year.

WHAT DO I DO WHEN THE PAYMENT PROCESSING FOR MY ON-LINE ORDER WILL NOT COMPLETE?

Unfortunately some platforms do not work properly in the processing of your payment. iPhones and iPads seem to have ordering and payment processing issues as do some other handheld devices.

Solutions:

1. You can call us at 800-742-0455 during business hours of 8AM-4:30PM to place your order with the retail sales department at extension #108.

2. Try using your desktop to place your order and process your payment. Please note: If you have a different shipping address from your payment billing address the system sometimes will not process.

We hope to update some of these systems in the future to make it easier to shop with us. 

How Do I Install the Sear and Trigger Assembly?

WARNING!!!

When installing the sear on your youth or adult trigger please take note on the correct positioning.

The sear must be installed correctly to be safe. Check the position when you remove and replace to eliminate any chance of failure.

Included below are images of the youth and adult trigger showing the correct position of the installed sear.

CORRECT Sear Installation on Trigger

CORRECT Sear Installation on Trigger

 

What does a Generation 1 vs Generation 2 Crickett® Brand Rifle Include?

You will find the Generation 1 Crickett® brand rifles available at most big box retailers and some buy group dealers.

The Generation 1 model is the original Crickett® action developed in 1996, bolt action with manual cocking knob and peep sights. It requires you to feed the ammunition into the barrel opening then close the bolt and activate by pulling the cocking knob back to the fire position. As with both generations the firing pin is blocked from discharge until the trigger is pulled.

The improved Generation 2 Crickett® models were released in December of 2017 and are available through wholesale distribution and most dealers that carry our brands.

The generation 2 model has enhanced features including installed swivel studs to mount your sling and the EZ Load feed ramp. The feed ramp make loading the rifle EZ as you place the shell into the receiver then close the bolt and the ramp will feed the ammunition in place for you. You can then pull the cocking knob back to the fire position.

GEN 1 MODELS WILL HAVE NO SWIVEL STUDS – THESE HOLES ARE MOLDED IN THE STOCK AND ARE FOR SWIVEL STUDS TO MOUNT A SLING

 

How Do I Install My Crickett®/Chipmunk® Pistol Scope Mount?

Installation Instructions:

  1. Remove the two 6×48 plug screws on the front of the receiver and the entire rear sight assembly.
  2. Place the mount base in position and start the three 6×48 screws. Do not tighten.
  3. With one hand, clamp the mount base onto the receiver. Tighten all three screws, one turn, each at a time until tight.
  4. Install and tighten any standard tip-off rings and scope of your choice.

How Do I Install My Crickett®/Chipmunk® Rifle Scope Mount?

Installation Instructions:

  1. Remove the two 6×48 plug screws on the front of the receiver and remove the 6×32 screw holding the rear peep sight from the rear sight elevation bar.
  2. Loosen the rear sight elevation screw (on side of the receiver.)
  3. Place mount base in position and start the two front 6×48 screws and one rear 6×32 screw.
  4. Continue to fully tighten the front two screws. Then tighten the one rear screw.
  5. Maintain down pressure on mount and tighten the elevation screw.
  6. Install and tighten any standard 3/8″ tip-off rings and scope of your choice.

Is there a left-handed model Crickett® or Chipmunk®?

Many of our customers contact us wanting to know if we offer any of our rifles in a left-handed model.

Yes, we offer two rifles in a left-handed model.

Chipmunk® Rifle (00001LH) which is available only with a walnut stock and blued barrel.

Crickett Alloy® Model 6061™ (KSA2180LH) which is available only with black chassis and blued barrel.

HOW LONG WILL IT TAKE FOR MY ORDER TO ARRIVE?

SHIPPING

We are only able to process and ship items within the United States through our system.

If you would like to make an accessory purchase and are from another country you can call our sales department to place your order. Please note that your international shipping cost and any tariffs for your country or taxes will be added to your order. Note: When ordering all specific restrictions for your country will be followed.

When you place an order, orders are generally shipped out within 1-2 business days via USPS or FEDEX depending on the weight and destination of the package. During the Holiday Seasons orders are generally shipped out within 2-4 business days via USPS or FEDEX depending on the weight and destination of the package. Once your order has shipped please allow 7 to 10 business days for arrival. You will receive an email with your package tracking throughout the process.

All expedited orders MUST be placed over the phone. We offer FedEx 2nd Day or Overnight shipping for an additional fee.

IS MY CRICKETT® MISSING A SCREW?

Many of our customers call us to ask about a “missing screw” in their new synthetic Crickett®.

The Crickett® rifle has only one take-down screw located 1.5″ in front of the trigger guard.

The other two “holes” in the forend and buttstock are actually molded in to accept swivel studs where a sling can be attached.

SEE FAQ ON DIFFERENCE GENERATION 1 MODEL VS GENERATION 2 MODEL CRICKETT® BRAND RIFLE

Generation 2 Crickett® rifles come standard with these swivel studs already installed.